Flottjet circular saw blades

Flottjet circular saw blades

Saw diameters and bore sizes.
Find the right saw blade fitting to your Flottjet circular saw machine.

Whatever machinery you have, mount a compatible blade measuring the full size. Substituting a close enough undersized diameter may be possible, but not ideal.


modelnumber size
250 x 20 mm
250 x 20 mm
250 x 20 mm
250 x 30 mm
TKS2011D, TKS2011W, KS2011D, KS2011W
250 x 30 mm
250 x 30 mm
250 x 30 mm
Profi 2000, Profi 2001, Profi 3011, Uni-Profi 2011
250 x 30 mm
FKS3000, KKS305M
315 x 30 mm

Always work with sharp tools for the best result and safety. Wear safety glasses, work gloves and ear protection if possible, when you work with machines.

Flott - Flottjet
Woodworking machines made by flott are known as solid and quality. The stationary machines are circularsaw machines, beltsaws and sanding machines.

flottjet woodworking machines

Kräku Maschinenbau und Dienstleistungs GmbH
Flottstraße 25
56472 Großseifen


Flottjet K4500
Flottjet Profi3000


Circular saw blades have different sizes from a few inches to several feet across. Diameter is the span from one edge of the circle to the other measured along a center line. The radius is half that; it is the span from the center to the edge. A saw doesn't have the capacity to cut that deep, though. Maximum depth of cut is less than the radius. It cuts no deeper than 1/3 of its diameter. A 10" saw cuts about 3" deep at maximum capacity, and usually less. A big blade has greater cutting depth. Not only can a larger blade cut deeper, it also has a larger circumference, or the measurement around the rim. A longer cutting length around the circumference makes space for more tips overall. For this reason, bigger blades have longer endurance. Small blades have less circumference circling the rim, which explains how fast they get used up. A big one might last the equivalent of two smaller ones. However, large sizes won't necessarily allow faster feed; coarseness determines that.

Copyright © 2019 -
SuRish int. - all rights reserved